11-12-2019, 03:21 PM
Sir, I have a problem in inserting the Rs 232 port in MM3_SU1506G_DSZ_V1.1 board. RS 232 port has 4 holes.
|
Rs 232 port
|
11-12-2019, 07:04 PM
(This post was last modified: 11-12-2019, 07:06 PM by Sikandar129.)
Sir, I have got that Rs 232 port from a normal Setellite receive. But it cant plug in MM3_SU1506G receiver board.
My receiver became dead after wrong flashing and now it is not recovered through USB. It only showing red light. I tried to flash it through Rs 232 port but port not inserting in its MM3_SU1506G board. 
11-12-2019, 08:05 PM
use wires instead of rs232 connector and share the board picture also
11-13-2019, 05:38 AM
(This post was last modified: 11-13-2019, 05:39 AM by Sikandar129.)
It has board of 1506g receiver and it has no Rs 232
11-13-2019, 09:23 PM
HDMI aur AV port k darmian jo jack hy woh rs232 k liey hoga
11-14-2019, 11:24 AM
Sir, I have tried in that. It has 3 pins and the Rs 232 port plug has 4 holes and that's why rs 232 plug not inserted into that port on board.
11-14-2019, 07:44 PM
you have the old rs232 connector new has three wires only
11-14-2019, 08:16 PM
Sir, Rs 232 has 3 wires going in plug but plug has 4 holes...
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread: 1 Guest(s)