I am having a problem . 'Solution of XMC Flash IC Write/Erase Error' on Youtube. The problem you mentioned in your video titled 'A Detail in Urdu/Hindi'. I did what they showed me, but it didn't work. I can read the MXIC bios. I can't write it down and erase it. Would you help if you know the solution? I can write and delete other brand bioses without any problems.



The solutions I have tried are :
* I have tried five different versions of the program.
*I tried it on another computer.
*I tried giving the chip ID.
* I have tried two different chips from MXIC brand.
* I have repaired their integrated solder by disassembling the RT809F.
*I was able to write the same chip with another RT809F.


I'm leaving the screenshots at the bottom.

Hello! i had swapped a combo board into another tv as the board in the tv was damaged. 
i dont have a remote for the working board so is there a way use the remote from the old combo board 
on the new one?

Aslamualikum 

mujhe ye pata karna hai k lahore me kahn pe hai Bonding Machine meri shop hai main lcd or led repair karta hon to aksar penal me problem hoti hai to mujhe cof Bonding ka masla ata rahta hai so please koi help kary ga k lahore me hai kisi k pass ye machine jo repair karta hon panels

i have been trying top install firmware on tp.vst59s.pb813 (32") and it just doesnt pick it, am i doing anything wrong why isnt it working. i have looked it up all the sites i have checked say to just simply format the usb copy th .bin file plug it in the card, give the card power, the light will start flashing and once its done, its done. i have been tryiong for past 2 hours itws not working can anyone help me? or tell me what m i doing wrong?
and when i tried updating the firmware from the menu it says "cant detect software" when its the only thing on the drive.
i am so confused and furious.

Required Kk.m368.a8 firm wear in 1920x1080

AOA

mene kazmi sir ki video dekhi thi k hard reset kase karte han us k bad mene same wasa hi kiya jab wapis 1147 code lagaya color sahi karne k liye jahn pe vasa (LSB) karna tha wahn mene vasa (MSB) ok kar diya ab masal ye a raha hai k phle white pe 4 colors lines ati han phir band ho k puri screen white ho jati hai, main ap ko video me dekhta hon  



[video=vimeo]<iframe title="vimeo-player" src="https://player.vimeo.com/video/616834244?h=f16465e995" width="640" height="355" frameborder="0" allowfullscreen></iframe>[/video]

Thanks for accepting me.

Merci pour m'avoir accepté.

شكرا جزيلا على استقبالي

Salaam alikum 
Hi 
I need help to flash starsat LED65 with T.MT5522S.82

I already open my tv cover and take the number of motherboard , and I downloaded bin files and I format the flash drive and but the bin and pk file in the flash, 
But I start the tv , but nothing happened  , it just the wisdom logo flash flying .. 

Can you help

TV LED 32d5000 smart+t2 black
Main: HK.T.RT2831P565
ZSCH-2019060095-R01789

Module:C320Y19-E1(1366x766HDready)
(XSD5TSS02)
JUC5.370.00244577-02.
8270237547M026U907090026

e-NAND 916A H26M41204HPR

eMMC:8Gb

After the update - 2831P565_HV430FHB_1G_8G_CH_T2_UKRAINE_32_BRAVIS190709_113433_svn22841 began to reboot and hang once or twice a day and PlayMarket stopped loading. In this regard, it was decided to flash for USB. The firmware for USB is taken from here USB https://remont-aud.net/dump/lcd_pdp_tv/b...1-0-103411
after uploading the firmware check checksum matches - CRC32 9C515A56. The size of the unpacked file install.img is 756Mb. During the firmware, it stops with the same error # 625, and after unplugging the power plug and turning it back on, it does not exit the standby mode (it does not respond to the remote control). I tried to change the flash drives. Process video
https://drive.google.com/file/d/18PsPDy3...sp=sharing
How to reset to recovery is not known. Only the "Power" button is displayed on the external panel.
During flashing, characters and labels appear upside down and mirrored. Firmware Curve File Gdisk

file size install.img 756Mb CRC32 9C515A56
I ask the community to help with the firmware or advise how to reset to RECOVERY (there are no Vol + / Vol- buttons, only Power).

                   

TV LED 32d5000 smart+t2 black
Main: HK.T.RT2831P565
ZSCH-2019060095-R01789

Module:C320Y19-E1(1366x766HDready)
(XSD5TSS02)
JUC5.370.00244577-02.
8270237547M026U907090026

e-NAND 916A H26M41204HPR

eMMC:8Gb

After the update - 2831P565_HV430FHB_1G_8G_CH_T2_UKRAINE_32_BRAVIS190709_113433_svn22841 began to reboot and hang once or twice a day and PlayMarket stopped loading. In this regard, it was decided to flash for USB. The firmware for USB is taken from here USB https://remont-aud.net/dump/lcd_pdp_tv/b...1-0-103411
after uploading the firmware check checksum matches - CRC32 9C515A56. The size of the unpacked file install.img is 756Mb. During the firmware, it stops with the same error # 625, and after unplugging the power plug and turning it back on, it does not exit the standby mode (it does not respond to the remote control). I tried to change the flash drives. Process video
https://drive.google.com/file/d/18PsPDy3...sp=sharing
How to reset to recovery is not known. Only the "Power" button is displayed on the external panel. During flashing, characters and labels appear upside down and mirrored. Firmware Curve File Gdisk

file size install.img 756Mb CRC32 9C515A56
I ask the community to help with the firmware or advise how to reset to RECOVERY (there are no Vol + / Vol- buttons, only Power).